BRASS FITTINGS

2" ABS DRAIN

ABS snap-in drain fits inside Schedule 40 DWV pipe cut flush to floor. Great for direct vent surfaces and water heaters, or to cover any open ended pipe. Solvent welds inside pipe, flush to floor. 2-3/8" plastic strainer. 1-piece. Bulk.

3" ABS DRAIN

ABS snap-in drain fits inside Schedule 40 DWV pipe cut flush to floor. Great for direct vent surfaces and water heaters, or to cover any open ended pipe. Solvent welds inside pipe, flush to floor. 2-3/8" plastic strainer. 1-piece. Bulk.

*4" ABS DRAIN

ABS snap-in drain fits inside Schedule 40 DWV pipe cut flush to floor. Great for direct vent surfaces and water heaters, or to cover any open ended pipe. Solvent welds inside pipe, flush to floor. 2-3/8" plastic strainer. 1-piece. Bulk.

1/2X10"PVC NIPPLE****

May be used in a great variety of applications for transport of water and other liquids. Pipe thread compound or sealing tape should be applied to threaded portion of nipple. Nipples are IPS (iron pipe size) and threaded to NPT (National Pipe Thread) pipe threads and meet ASTM (American Society for Testing and Materials) specifications D1785.

*4X3 S&D REDUC COUPLING

PVC. 4" x 3", S & D reducing coupling. Hub x Hub.

4" 90D DWV SANITRY ELBOW*****

PVC Schedule 40 DWV. (1/4 bend), PVC-DWV (hub x hub).

4" PVC-DWV WYE*****************

PVC Schedule 40 DWV. PVC-DWV (hub x hub x hub).

LAVATORY POP-UP

1-1/4" drain, cast brass tee, lift rod and knob, removable stopper, chrome-plated. For use with any centerset that is drilled for pop-up lift rod, with overflow.

3/4X1/2 PVC SPXF BUSHING

For Schedule 40 cold water pressure pipe. 1 end solvent welds into hub of another fitting with Female threads on the other end. SPG x T.

1-1/2" FLEXIBLE PIPE CAP

Made of strong flexible PVC for a tight fit. Reusable, easy-to-install. Best method for sealing test pipes, pipe ends, and cleanouts. Used for repair or alteration of drain, waster, or vent pipe and fittings. Fits cast-iron, steel, plastic, lead, and copper pipe. Especially suited for in-wall or other limited space connections. Extra length allows easy replacement of elbows or tees cut out at joint.

2" FLEXIBLE PIPE CAP

Made of strong flexible PVC for a tight fit. Reusable, easy-to-install. Best method for sealing test pipes, pipe ends, and cleanouts. Used for repair or alteration of drain, waster, or vent pipe and fittings. Fits cast-iron, steel, plastic, lead, and copper pipe. Especially suited for in-wall or other limited space connections. Extra length allows easy replacement of elbows or tees cut out at joint.

*3" PVC PIPE CAP

Made of strong flexible PVC for a tight fit. Reusable, easy-to-install. Best method for sealing test pipes, pipe ends, and cleanouts. Used for repair or alteration of drain, waster, or vent pipe and fittings. Fits cast-iron, steel, plastic, lead, and copper pipe. Especially suited for in-wall or other limited space connections. Extra length allows easy replacement of elbows or tees cut out at joint.

4" FLEXIBLE PIPE CAP

Made of strong flexible PVC for a tight fit. Reusable, easy-to-install. Best method for sealing test pipes, pipe ends, and cleanouts. Used for repair or alteration of drain, waster, or vent pipe and fittings. Fits cast-iron, steel, plastic, lead, and copper pipe. Especially suited for in-wall or other limited space connections. Extra length allows easy replacement of elbows or tees cut out at joint.

*4X4 FLEXIBLE COUPLING

Made of a tough elastomeric PVC compound that meets the requirements of ASTM No. D5926, are resistant to chemicals, ultraviolet rays, fungus growth, and normal sewer gases. Stainless steel clamps are corrosion-resistant and rust-proof. For use in sewer and drain, water, and vent piping. Maximum working pressure 4.3 P.S.I. (29.6 kPa); Maximum operating temperature: 140 deg. F. nonconsistent. A = the inside diameter (I.D.) of side No. 1. B = the inside diameter (I.D.) of side No. 2. C = the length of the actual coupling, end to end.

QUART PURPLE PRIMER

A purple-tinted aggressive primer recommended for use on PVC and CPVC pipe and fittings, all schedules and diameters. Formulated to remove surface dirt, grease, and grime as well as soften the pipe surface to allow for a fast, secure, and permanent solvent weld. For use in areas where code calls for verification that a primer has been used. Recommended for all PVC and CPVC installations. NSF and UPC listed. Exceeds ASTM F-656.

*4" BRASS CLEANOUT PLUG

Hollow pattern with raised square head. Made of a solid brass material.

4" DWV CLEANOUT W/PLUG WHT

PVC Schedule 40 DWV. PVC-DWV (spigot x F.I.P.).

3/4X1/2 MIPXFIP BUSHING

For Schedule 40 cold water pressure pipe. Reducing bushing inserts into threaded fitting socket to reduce to smaller threaded opening.

1/2" FIP S I 90D ELBOW**********

Schedule 40 cold water pressure fitting. Commonly used to connect threaded sprinkler risers to underground systems. Slip x Slip x F.I.P. thread.

*1-1/2" STRAINER CUP

Fits the small kitchen sink outlet. Chrome-plated. For 1-1/2" drain opening. Carded.

1/2x3/8OD Q/C COUPLING

1X3 RED BRASS NIPPLE

Import. Meets following Specifications: Alloy No. C23000 per ASTM B43, ANSI/ASME B1.20.1, WW-N-351 Federal Specifications, MS51846 Military standard. California AB 1953. Vermont SB152. Directive 2002/95/EC-ROHS.

1X2 RED BRASS NIPPLE

Import. Meets following Specifications: Alloy No. C23000 per ASTM B43, ANSI/ASME B1.20.1, WW-N-351 Federal Specifications, MS51846 Military standard. California AB 1953. Vermont SB152. Directive 2002/95/EC-ROHS.

!" 45D FXM BRASS ELBOW

Female iron pipe X Male iron pipe. Rough brass. Import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG.

1X4 RED BRASS NIPPLE

Import. Meets following Specifications: Alloy No. C23000 per ASTM B43, ANSI/ASME B1.20.1, WW-N-351 Federal Specifications, MS51846 Military standard. California AB 1953. Vermont SB152. Directive 2002/95/EC-ROHS.

1x6 RED BRASS NIPPLE

Import. Meets following Specifications: Alloy No. C23000 per ASTM B43, ANSI/ASME B1.20.1, WW-N-351 Federal Specifications, MS51846 Military standard. California AB 1953. Vermont SB152. Directive 2002/95/EC-ROHS.

1x5 RED BRASS NIPPLE

Import. Meets following Specifications: Alloy No. C23000 per ASTM B43, ANSI/ASME B1.20.1, WW-N-351 Federal Specifications, MS51846 Military standard. California AB 1953. Vermont SB152. Directive 2002/95/EC-ROHS.

1XCLOSE RED BRASS NIPPLE

Import. Meets following Specifications: Alloy No. C23000 per ASTM B43, ANSI/ASME B1.20.1, WW-N-351 Federal Specifications, MS51846 Military standard. California AB 1953. Vermont SB152. Directive 2002/95/EC-ROHS.

*TWIST/LOCK BASKET*****

For Turn'n Seal or Spin-Lock style strainers. 3-1/2" stainless steel basket with threaded, chrome-plated brass post. Replaces basket in original Spin'n Grin strainers.

3x1-1/2 ABS REDUCING COUPLING

ABS Schedule 40 DWV. Used for connecting pipe of different sizes.

1-1/2x90 ABS LONG SWEEP ELL

ABS Schedule 40 DWV. (Long turn quarter bend). Hub x Hub. Used to change direction in piping in drain-waste-vent applications.

2"x90D LONG SWEEP ELBOW

ABS Schedule 40 DWV. (Long turn quarter bend). Hub x Hub. Used to change direction in piping in drain-waste-vent applications.

3"x90D LONG SWEEP ELBOW

ABS Schedule 40 DWV. (Long turn quarter bend). Hub x Hub. Used to change direction in piping in drain-waste-vent applications.

4"x90 LONG SWEEP ELBOW

ABS Schedule 40 DWV. (Long turn quarter bend). Hub x Hub. Used to change direction in piping in drain-waste-vent applications.

1-1/2"x90D ABS VENT ELBOW

ABS Schedule 40 DWV. (Short turn quarter bend.) Hub x Hub. Used to change direction in piping in drain-waste-vent applications.

2"x90D ABS VENT ELBOW

ABS Schedule 40 DWV. (Short turn quarter bend.) Hub x Hub. Used to change direction in piping in drain-waste-vent applications.

3"x90D ABS VENT ELBOW

ABS Schedule 40 DWV. (Short turn quarter bend.) Hub x Hub. Used to change direction in piping in drain-waste-vent applications.

1-1/2X7 22GA WALL TUBE

Wall tube brass 22-gauge. Do it hang tagged.

1-1/2" 60D ABS ELBOW

ABS Schedule 40 DWV. (1/6 bend). Hub x Hub. Used to change direction in piping in drain-waste-vent applications.

2"x60D ABS ELBOW

ABS Schedule 40 DWV. (1/6 bend). Hub x Hub. Used to change direction in piping in drain-waste-vent applications.